HTK(Honda Connectors): SD (SDHC/SDXC) Memory Card Socket for Bus Interface UHS-II (Bus speed:312 MB/s max.), AXA5 Series

This SD card socket is applicable to UHS-II (Bus speed:312 MB/s max.) of the next generation SD card standard.
● Both (Top & Bottom) metal shell structure:
Mechanical strength is more than 6 times of current SD card and it can maintain high reliability for long term.
The noise to be generated from SD card reduced more than 20% in comparison with current SD card.
The heat to be generated from SD card radiates heat by both metal shell, and the temperature of SD card reduced about 8°C in comparison with current SD card.
● About mounting method to P.C.B. surface:
The socket terminal keep good coplanarity and prevent poor soldering.
The soldering appearance of socket terminal can give visual inspection after soldering.

 

SMD Type Socket (with card jump-out prevention function)

AXA573062P AXA563062P
Standard Type (for top surfafe of board) Reverse Type (for bottom surface of board)
P/N: AXA573062P P/N: AXA563062P

 

Specifications

Rated Voltage 3.6 V DC
Rated Current 0.5 A / one contact
Insulation resistance 1,000 MΩ minimam (Initial)
Dielectric Withstand Voltage 500 V AC (r.m.s.) one minute
Contact Resistance Signal Contact Area :100 mΩ max. (Initial)
Card Detect Switch Area:150 mΩ max.(Initial)
Card Insertion/Removal Method Push-Push Type
Durability (Mating cycles) 5,000 cycles
Operating Temperature -25°C to +90°C

 

Applications

Digital Still Camera (DSC)
Digital Video Camera (DVC)
Digital Television (DTV)
Laptop Computer & Peripheral
USB Card Reader Adaptor (for SD-UHS-II )
Car Navigation System
Industrial Electronic Equipment
Medical Electronic Equipment
Others (Electonic Equipment using the SD card)

 

Applicable SD Card

Applicable SD Card

 

Download PDF

Click on the image (2.8MB)
Catalog: SD (SDHC/SDXC) Memory Card Socket for Bus Interface UHS-II (Bus speed:312 MB/s max.) , AXA5 Series Download PDF

 

Head office sales division

  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name

 

HTK(Honda Connectors): RF coaxial connectors

FLA series for SMA type (MIL-C-39012, IEC169-15: ~26.5 GHz, 50Ω) coaxial connector

FLA series ST cable plug R/A cable plug
MIL-C-39012, IEC169-15, FLA series MIL-C-39012, IEC169-15, FLA-H-SPM1( )+, FLA-H-SPM9( )+ MIL-C-39012, IEC169-15, FLA-H-LPM 3( )+
  P/N: FLA-H-SPM1( )+  
  (for 0.085 inch semi-rigid)  
  P/N: FLA-H-SPM9( )+ P/N: FLA-H-LPM 3( )+
  (for 0.141 inch semi-rigid) (0.085 inch semi-rigid)

 

ST cable plug R/A cable plug VT jack For board
(DIP solder type)
MIL-C-39012, IEC169-15, FLA-H-SPM11( )+ MIL-C-39012, IEC169-15, FLA-H-LPM5( )+ MIL-C-39012, IEC169-15, FLA-H-SRF48( )+
P/N: FLA-H-SPM11( )+ P/N: FLA-H-LPM5( )+ P/N: FLA-H-SRF48( )+
(1.5D-2V coax. Cable) (1.5D-2V coax. Cable)  

 

 

FG-Y series for SMB type (MIL-C-39012: ~2 or 3 GHz, 50Ω) coaxial connector

FG-Y series ST cable plug R/A cable plug
MIL-C-39012, FG-Yシリーズ MIL-C-39012, FG-Y215A+, FG-Y245A+ MIL-C-39012, FG-Y217A+, FG-Y227A+
  P/N: FG-Y215A+ P/N: FG-Y217A+
  (Shell: Au plated) (2 slits: mating side)
  P/N: FG-Y245A+ P/N: FG-Y227A+
  (Shell: Ni plated) (4 slits: mating side)
  (1.5DQEV or 1.5DQEWcoax. Cable) (1.5DQEV or 1.5DQEW coax. Cable)

 

  R/A receptacleFor board
(DIP solder type)
VT receptacle For board
(DIP solder type)
  MIL-C-39012, FG-Y198A+, FG-Y218A+ MIL-C-39012, FG-Y8A+, FG-Y208A+
  P/N: FG-Y198A+ P/N: FG-Y8A+
  (Shell: Ni plated) (Shell: Ni plated)
  P/N: FG-Y218A+ P/N: FG-Y208A+
  (Shell: Au plated) (Shell: Au plated)

 

 

FLCX series for MCX type ( IEC 61169-36, 50Ω or 75Ω) coaxial connector

FLCX series ST cable plug R/A cable plug
IEC61169-36, FLCX-CSPM1+ IEC61169-36, FLCX-CLPM1+
  P/N: FLCX-CSPM1+ P/N: FLCX-CLPM1+
  (For 1.5C-2V coax. Cable) (For 1.5C-2V coax. Cable)

 

  R/A receptacle For board
(DIP solder type)
VT receptacle For board
(DIP solder type)
  IEC61169-36, FLCX-CLRF1+ IEC61169-36, FLCX-CSRF1+
  P/N: FLCX-CLRF1+ P/N: FLCX-CSRF1+

 

 

FLX series for MMCX type (~6 GHz, 50Ω) coaxial connector

FLX series R/A cable plug R/A cable plug
MMX type, FLX series MMX type, FLX-LPM4+ MMX type, FLX-LPM2+, FLX-LPM3+
    P/N: FLX-LPM2+
    (RG-178B/U coax. Cable)
  P/N: FLX-LPM4+ P/N: FLX-LPM3+
  (For 1.5C-2V coax. Cable) (RG-188A/U coax. Cable)

 

  R/A receptacle For board edge
(SMT solder type)
VT receptacle For board
(DIP solder type)
  MMX type, FLX-SRF3+ MMX type, FLX-SRF4+
  P/N: FLX-SRF3+ P/N: FLX-SRF4+

 

 

FLP series for SMP type (MIL-STD-348A, Straight: ~40 GHz, R/A: ~26.5 GHz, 50Ω) coaxial connector

FLP series ST cable jack R/A cable jack
MIL-STD-348A, SMP type, FLP series MIL-STD-348A,  SMP type, FLP-SPF1, FLP-SPF2 MIL-STD-348A,  SMP type, FLP-LPF1, FLP-LPF2
  P/N: FLP-SPF1 P/N: FLP-LPF1
  For 0.085 inch semi-rigid For 0.085 inch semi-rigid
  P/N: FLP-SPF2 P/N: FLP-LPF2
  (0.047 inch semi-rigid) (0.047 inch semi-rigid)

 

  R/A receptacle For board edge
(SMT solder type)
VT receptacle For board
(SMT solder type)
  MIL-STD-348A,  SMP type, FLP-SRML2 MIL-STD-348A,  SMP type, FLP-SRML3
  P/N: FLP-SRML2 P/N: FLP-SRML3

 

 

FLK series for K type (MIL-STD-348A, ~40 GHz, 50Ω) coaxial connector

FLK series ST cable plug ST cable jack
MIL-STD-348A, K type, FLK series MIL-STD-348A, K type, FLK-SPM1, FLK-SPM2 MIL-STD-348A, K type, FLK-SPF1, FLK-SPF2
  P/N: FLK-SPM1 P/N: FLK-SPF1
  (UT-120LL semi-rigid) (UT-120LL semi-rigid)
  P/N: FLK-SPM2 P/N: FLK-SPF2
  (UT-34LL semi-rigid) (UT-34 semi-rigid)

 

  Receptacle with 4 holes flange R/A receptacle For board edge
(SMT solder type)
  MIL-STD-348A, K type, FLK-SRF2 MIL-STD-348A, K type, FLK-SRF1
  P/N: FLK-SRF2 P/N: FLK-SRF1

 

Note1) P/N ( ) is :N/A: Passivated, G: Gold plated, B: Nickel plated.
Note2) ST: Straight, R/A: Right Angle, VT: Vertical

 

 

Download PDF

HTK (Honda connectors): RF coaxial connectors Catalog Download
Click on the image (1.0MB)
HTK (Honda connectors): RF coaxial connectors Catalog Download

 

 

Head office sales division

  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name

HTK(Honda Connectors): RJ-45 shielded type, modular connectors with screw lock

MOD-series
MOD series

 

Cable side plug with jack screw

MOD-YSP88P03+
P/N: MOD-YSP88P03+

 

 

R/A board side jack with screw lock device, SMT solder type

MOD-YSJ88YA03C+
P/N: MOD-YSJ88YA03C+

 

 

Vertical board side jack with screw lock device, DIP solder type

MOD-YSJ88D03C+
P/N: MOD-YSJ88D03C+

 

 

Specifications

Rated voltage 125 V AC (r.m.s)
Rated current 0.5 to 1.0 A (Jack)
Insulation resistance 1,000 MΩ at 100 V DC
Dielectric withstanding voltage 500 V AC (r.m.s) /one minute
Operating temperature – 40 to + 85 °C

 

Material and Finish

Parts name Material and Finish
Plug insulator PC resin UL 94V-2, (Color: Transparent)
Jack insulator PA9T (GF) resin, UL94 V-0 (Color, Black)
Plug shielded shell Stainless steel
Jack shielded shell Brass, Tin plated
Plug over molding Elastomer (Color: Black)
Plug contact, Jack contact Phosphor bronze, Gold over nickel plated
Jack screw, Female screw lock Steel, Nickel plated
Jack hex nut Steel, Nickel plated

 

Download PDF

HTK(Honda Connectors): RJ-45 shielded type,
modular connectors with screw lock Catalog Download PDF
Click on the image (250KB)
HTK(Honda Connectors): RJ-45 shielded type,
modular connectors with screw lock Catalog Download PDF

 

 

Head office sales division

  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name

HTK (Honda connectors): QZAC & QZAC-A series, Floating stacked connectors for automotive (In-car: Car navigation etc.) & others

QZAC series

0.5 mm pitch, 60 pos., stack. height: 6 to 7 mm, ±0.5 mm floating for X, Y direction

QZAC-60FYBL+, QZAC-60FYL+, QZAC-60MYBL+, QZAC-60MYL+
Vertical mount type, Female, SMT solder type:
P/N: QZAC-60FYBL+ (With positioning peg)
P/N: QZAC-60FYL+ (Without positioning peg)
 
Vertical mount type, Male, SMT solder type:
P/N: QZAC-60MYBL+ (With positioning peg)
P/N: QZAC-60MYL+ (Without positioning peg)

 

QZAC-A series

0.8 mm pitch, 20 pos., stack. height: 15 mm, ±0.8 mm floating for X,Y direction

QZAC-A20FY+, QZAC-A20MY+
Vertical mount type, Female, SMT solder type
P/N: QZAC-A20FY+
 
Vertical mount type, Male, SMT solder type
P/N: QZAC-A20MY+

 

Specifications

Rated Voltage 50 V AC (r.m.s)
Rated Current 0.3 A / Contact
Operation Temperature Range – 40 to + 85 °C.
Insulation Resistance 1,000 MΩ minimum at
Dielectric Withstanding Voltage 200 V AC / One minute

 

Material and Finish

Parts name Material and Finish
Female insulator PA9T (GF) resin, UL 94V-0 (Color, Black)
Male insulator LCP (GF) resin, UL 94V-0 (Color, Black)
Male contact Copper alloy, Gold over nickel plated
Female contact Copper alloy, Gold over nickel plated
Hold down Brass, Tin plated

 

Download PDF

HTK (Honda connectors): QZAC & QZAC-A series Catalog Download PDF
Click on the image (1.2MB)
HTK (Honda connectors): QZAC & QZAC-A series Catalog Download PDF

 

 

Head office sales division

  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name

HTK (Honda connectors): TAK series connectors for automotive(In-car), USB 2.0 transmission compatible

TAK series

 

Board connectors (Male)

TAK-A

 

Cable connectors (Female)

TAK-A

 

TAK-A
Applicable crimp contactト
P/N Applicable wire size Wire insulationdia
LPC-F113S 32 AWG 0.6mm Max.
LPC-F113N 22 to 32 AWG 1.0mm Max.
LPC-F113L 22 to 26 AWG 1.1mm Max.

 

In-line cable connectors (Male)

TAK-A4SMCGB-AA
4 pos.
P/N: TAK-A4SMCGB-AA+ (Color: Black)
Applicable cable O.D: 4.5 mm dia.
Applicable crimp contact:
P/N Wire size Insulation dia.
TAK-MGE+ 22 to 26 AWG 1.1mm Max.
TAK-MGB+ 28 to 32 AWG 1.0mm Max.

 

TAK-A6SMCGB-AC+, TAK-A6SMCGA-BC+, TAK-A6SMCGC-CC+
6 pos.
P/N: TAK-A6SMCGB-AC+ (Color: Black)
P/N: TAK-A6SMCGA-BC+ (Color: Blue)
P/N: TAK-A6SMCGC-CC+ (Color: Brawn)
Applicable cable O.D: 5.5 mm dia.
Applicable crimp contact:
P/N Wire size Insulation dia.
TAK-MGE+ 22 to 26 AWG 1.1mm Max.
TAK-MGB+ 28 to 32 AWG 1.0mm Max.

 

 

Download PDF

HTK(Honda Connectors): TAK series Catalog Download PDF
Click on the image (290KB)
HTK(Honda Connectors): TAK series Catalog Download PDF

 

 

Head office sales division

  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name

HTK (Honda connectors): HDRA seriesconnectors, 68 pos. based on VHDCI(ANSI/SFF8441), similar 36 pos.and 100 pos. connectors

We are interested to be a supplier of “HONDA CONNECTORS” for your company.
We are celebrating our 25th anniversary by offering you savings.
As a valued customer, you’re cordially invited to celebrate with us by saving 25% or more on select Connector and Back-shell. If you need any further information regarding our products or services, please do not hesitate in contact me at “E-Mail: office@tokoh.biz”.

Board side connectors (Female)

HDRA-EA36LFDT-SL+, HDRA-EA36LFDT-SL, HDRA-EA36LFDT-SLE+ HDRA-EC68LFDT‒SL+, HDRA-EC68LFDTS‒SL+, HDRA-EC68LFDT2‒SL
R/A 36 pos. DIP solder type R/A 68 pos. DIP solder type
P/N: HDRA-EA36LFDT-SL( )+ P/N: HDRA-EC68LFDT( )‒SL+
Front panel thickness: Location peg length:
SL: 1.12 mm, SLC: 0.8 mm, SLE: N/A LFDT: 3.7 mm, LFDTS: 2.3 mm, LFDT2: 1.4 mm
Front panel thickness: SL+: 1.12 mm

 

HDRA-E100LFDT-SL+, HDRA-E100LFDT1-SL+ HDRA-E68W1LFDT1EC-SL+, HDRA-E68W2LFDT1EC-SL+
R/A 100 pos. DIP solder type Dual stacked
P/N: HDRA-E100LFDT( )-SL+ R/A 68 pos. x 2 DIP solder type
Terminal and board lock pin length: P/N: HDRA-E68W( )LFDT1EC-SL+
LFDT: 2.08 and 2.28 mm, LFDT1: 3.4 and 2.6 mm Length of contact, through hole::
Front panel thickness: SL+: 1.12 mm 1: 2.08mm (PCB: 1.6 mm thick)
2: 3.4mm (PCB: 2.4 mm thick)

 

HDRA-E100W1LFDT1EC-SL+, HDRA-E100W2LFDT1EC-SL+ HDRA二段スタッキング概略図
Dual stacked Dual stacked. Connector
R/A 100 pos x 2. DIP solder type  
P/N: HDRA-E100W( )LFDT1EC-SL+  
Length of contacts or board lock pins:  
1: 2.08 mm contacts, 2.28 mm board lock pins  
2: 3.4 mm contacts, 3.6 mm board lock pins  

 

Cable side connectors (Male)

HDRA-E36MA+ HDRA-E68MA+
36 pos. IDC type 68 pos. IDC type
P/N: HDRA-E36MA+ P/N: HDRA-E68MA+
Applicable wire: Applicable wire:
30 (7/0.1) AWG 30 (7/0.1) AWG
Insulation jacket: 0.58 mm dia. Insulation jacket: 0.58 mm dia.

 

HDRA-E68MA+, HDRA-E68MC+ HDRA-E100M1+, HDRA-E100MA+
68 pos. IDC type for dual stack 100 pos. IDC type for single and
board side connector dual stack board side connector
P/N: HDRA-E68M( )+ P/N: HDRA-E100M( )1+
Applicable wire: Applicable wire:
MA: 30 (7/0.1) AWG, 0.58 mm dia. ( ): 30 (1/0.254) AWG, 0.58 mm dia.
MC: 34 (7/0.64) AWG, 0.44 mm dia. A: 30 (7/0.1) AWG, 0.58 mm dia.

 

Back-shell for cable side connectors

HDRA-E36LPTH HDRA-E68LGKPA
For 36 pos. cableconnector For 68 pos. cable connector
P/N: HDRA-E36LPTH P/N: HDRA-E68LGKPA
Cable opening: 6.5 mm dia. Cable Opening:13 x 9.5 mm ellipse

 

HDRA-E68LGKPC, HDRA-E68LGKPE, HDRA-E68LGKPF HDRA-E100LPA, HDRA-E100LPWB, HDRA-E100LPWC
For 68 pos. cable connector, for dual stack  
board connector. Ultra sonic welding type. For 100 pos. cable connector
P/N: HDRA-E68LGKP( ) P/N: HDRA-E100LP( )
LGKPC: Thick. 11.5 mm, C/O. 10.5 x 9.5 ellipse LPA: Thick.12.1mm, C/O 10.8 x 10.1 mm ellipse
LGKPE: Thick. 9.5 mm, C/O. 10.5 mm dia. LPWB: Thick. 9 mm, C/O (7.6 x 8.3 mm) 2plcs.
LGKPF: Thick. 9 mm, C/O. 10.5 mm dia. LPWC: Thick. 9 mm, C/O 12 x 7.6 mm ellipse

 

 

Download PDF

HTK (Honda connectors): HDRA seriesconnectors, 68 pos. based on
VHDCI(ANSI/SFF8441), similar 36 pos.and 100 pos. connectors Catalog Download PDF
Click on the image (720KB)
HTK (Honda connectors): HDRA seriesconnectors, 68 pos. based on
VHDCI(ANSI/SFF8441), similar 36 pos.and 100 pos. connectors Catalog Download PDF

 

 

Head office sales division

  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name

HTK (Honda connectors): LVX series connectors for multi micro-coaxial cable, 0.4 mm pitch, 1.2 mm mated height

LVC series
  Example of application:Mobile phone, Lap-top PC, Network camera etc.

 

Plug for micro-coaxial cable

LVX-A30LMSG+(30 pos.) LVX-A40LMSG+(40 pos.) パルスヒート装置例
R/A plug for micro-coaxial Cable Pulse heat equipment
Wire termination method: Pulse heat solder  
P/N: LVX-A30LMSG+(30 pos.)  
P/N: LVX-A40LMSG+(40 pos.)  
Applicable cable: 42 AWG (7/0.025 mm) micro-coaxial cable  
Insulation jacket O.D: 0.3 mm dia.  

 

Receptacle for board

LVX-A30SFYG+(30 pos.) LVX-A40SFYG+(40 pos.) LVCケーブル仕様
Vertical receptacle for board Cable specification
SMT solder type (1) UL 1354
P/N: LVX-A30SFYG+(30 pos.) (2) Inner conductor: 42 AWG (7/0.025 mm)
P/N: LVX-A40SFYG+(40 pos.) (3) Insulation: 0.18 mm dia.
  (4) Outer conductor: 0.03 mm thick.
  (5) Insulation jacket: 0.3 mm dia.

 

Specifications

Rated voltage 100 V AC (r.m.s)
Rated current 0.2 A / contact
Insulation resistance 100 MΩ minimum at 250 V DC
Dielectric withstanding voltage 250 V AC (r.m.s) / one minute
Operating temperature range –20 to +70°C.

 

Material and Finish

Parts name Material and Finish
Insulator LCP resin (GF), UL 94V-0 (Color: Black)
Contact Copper alloy, Gold over nickel plated
Plug shielded shell Stainless steel, selective tin plated
Receptacle shielded shell Stainless steel, tin plated

 

Download PDF

HTK(Honda Connectors): LVX series Catalog Download PDF
Click on the image (1.8MB)
HTK(Honda Connectors): LVX series Catalog Download PDF

 

 

Head office sales division

  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name

HTK (Honda connectors): AXJ43 & AXJ44 series for Mini I/O 11 pos. connectors (Mini USB 5 pin plus 6 pin)

AXJ series
  Example of application: Mobile phone, Smart phone, DSC etc.

 

Receptacle for board Plug for cable
AXJ436540 AXJ443000
R/A receptacle for board SMT solder type(Offset PCB mount), Straight plug cable
with vacuum pad Mini AB type shape. Wire solder type, Mini AB type shape
Mating: Following photo plug & MiniUSB A&B type plug.  
P/N: AXJ436540 P/N: AXJ443000

 

AXJ436540 Structural drawings

 

AXJ436540 & AXJ443000 Fit compatibility

 

Specifications

Rated Voltage 30 V DC/AC
Rated current Terminal #1, 5, 6, 11 – 2.0 A, #2, 3, 4 – 1.0 A, #7, 8, 9, 10 – 0.5 A, Total: 8 A
Insulation Resistance 100 MΩ min. at 100 V DC
Withstanding Voltage 100 V AC / one minute
Operating temperature – 25 to + 90 °C.

 

Material and Finish

Parts name Material and Finish
Insulator Heat resistance plastic: UL 94V-0 (Color: Black)
Contact Copper alloy: Contact area – Gold over nickel plated, Terminal area – Tin over nickel plated
Receptacle shielded shell Stainless steel, Tin over nickel plated
Plug shielded shell Stainless steel, Nickel plated

 

Download PDF

HTK (Honda connectors): AXJ43 & AXJ44 series Catalog Download PDF
Click on the image (690KB)
HTK (Honda connectors): AXJ43 & AXJ44 series Catalog Download PDF

 

 

Head office sales division

  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name

HTK(Honda Connectors): Fiber optical connectors, Adapter with shutter

SC type adapter with shutter

Simplex, flangeless
Simplex, with flange Spring plate Duplex, with flange
Screw mounting type mounting type Screw mounting type
P/N: LGC-SA303 P/N: LGC-SA317B P/N: LGC-SV2A303

 

Duplex, flangeless Quad, flangeless
Spring plate Spring plate
mounting type mounting type
P/N: LGC-SV2A313 P/N: LGC-SH4A313

 

MU type adapter with shutter

Duplex, with flange Quad, with flange
Screw mounting type Spring mounting type
P/N: LGC-2SA632 P/N: LGC-4SA652

 

LC type adapter with shutter

Simplex, flangeless Duplex, flangeless
Spring mounting type Spring mounting type
P/N: LGC-SA70( ) P/N: LGC-2SA70( )

 

Material

Part Name Material
Insulator PPS resin UL94V-0
Split sleeve Zirconia or phosphor-bronze
Spring plate Stainless steel
Shutter Stainless steel

Note) Split sleeve material: Zirconia (Shown in above) Phosphorbronze (Not shown)

 

Download PDF

HTK(Honda Connectors): Fiber optical connectors, Adapter with shutter
Click on the image (410KB)
Catalog: Fiber optical connectors, Adapter with shutter

 

Head office sales division

  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name

HTK(Honda Connectors): HCN series cable connectors based on CompoNet

 

We are interested to be a supplier of “HONDA CONNECTORS” for your company.
We are celebrating our 25th anniversary by offering you savings.
As a valued customer, you’re cordially invited to celebrate with us by saving 25% or more on select Connector and Back-shell. If you need any further information regarding our products or services, please do not hesitate in contact me at “E-Mail: office@tokoh.biz”.

HCN series

 

Cable side connectors (Male)

HCN-TB4LMZG+, HCN-TB4LMZG-#10+   HCN-A4SMUG+, HCN-A4SMUG-#10+
Terminal Block Connector   IDC Connector
P/N: HCN-TB4LMZG+   P/N: HCN-A4SMUG+
P/N: HCN-TB4LMZG-#10+ (10 pcs. / one package)   P/N: HCN-A4SMUG-#10+ (10 pcs. / one package)
Applicable Cable:   Applicable Cable:
VCTF 2 cores round cable, wire size: 0.75 mm sq.   VCTF 2 cores round cable, wire size: 0.75 mm sq.

VCTF 4 cores round cable, wire size: 0.75 mm sq.

  VCTF 4 cores round cable, wire size: 0.75 mm sq.
Flat-cable for CompoNet I: OMRON P/N: DCA4-4F10   Flat-cable for CompoNet I: OMRON P/N: DCA4-4F10

 

Specification

Rated current 0.3 A (Signal), 4 A (Power)
Rated Voltage 30 V DC
Operating temperature – 30 to + 60°C.
Insulation Resistance 1,000 MΩ min. at 500 V DC
Withstanding Voltage 1,000 V AC / one minute

 

Material and Finish

Parts name Material and Finish
Insulator PBT resin (GF) UL 94V-0 (Black color)
Contact Copper alloy, Gold(contact area) over nickel plating
Terminal screw Steel, Nickel plating
Hex nut Steel, Nickel plating
Terminal cover PC resin UL 94 V-0
IDC insulator PA resin UL 94 V-HB

 

Download PDF

Click on the image (500KB)
HTK (Honda connectors): HCN series cable connectors based on CompoNet

 

 

Head office sales division

  • Address: 4-23-3, SHIMOMEGURO, MEGURO-KU, TOKYO, 153-0064, JAPAN
  • E-Mail: office@tokoh.biz
  • TEL. +81-3-3714-2800
  • FAX. +81-3-6661-4814
  • Skype ID: masatoshi-uchiyama

E-Mail Form

Your Name (required)

Your Email (required)

Subject

Your Message & Company Name